GS-CPE2614 is High Power 400mW WLAN Broadband Router with
14dBi panel antenna which fully supports the AP/Bridge/Client/Repeater
/Router/ WISP features and functional compliance of IEEE 802.11b/g standard.
It is designed to provide good performance with minimum power consumption
and enhance the advantages of robust system and cost-effective.
Our CPE series is targeted at competitive price-performance, better power
management and business offices.
Feature:
-Complies with IEEE 802.11b/g standard for 2.4GHz Wireless LAN.
-Supports bridging, routing, VPN, WISP functions between wireless
and wired Ethernet interfaces.|
-Supports 64-bit and 128-bit WEP, WPA, WPA2 encryption/decryption
function to protect the wireless data transmission.
-Supports IEEE 802.1x Authentication.
-Support Wi-Fi Protected Access Authentication with Radius and
Pre-Shared Key mode.
-Supports Inter-Access Point Protocol (IAPP).
-Supports Wireless Distribution System (WDS).
-Supports IEEE 802.3x full duplex flow control on 10/100M Ethernet interface.
-Supports DHCP server to provide clients auto IP addresses assignment.
-Supports DHCP client for Ethernet WAN interface auto IP address assignment.
-Driver-less operation with true 'Plug and Play'
-Work with all Operating Systems
SPECIFICATION:
|
Industrial Standard
|
|
Standard
|
802.11b/g (Wireless), 802.3 (10BaseT), 802.3u (100BaseT)
|
|
Interface
|
One 10/100BaseT with RJ45 port (WAN)
One 10/100BaseT with RJ45 port (LAN)
|
|
Security
|
64 bit/128 bit WEP, WPA, WPA2, port filtering, IP filtering, MAC filtering, port forwarding and DMZ hosting
|
|
RF
|
|
Frequency Band
|
2.4GHz – 2.4846GHz ISM Band, DSSS
|
|
Signal Type & Modulation
|
CCK (802.11b), OFDM (802.11g)
|
|
Antenna
|
Integrated 14 dBi Panel Antenna
|
|
Output Power
|
25±1dBm@11b
|
|
Sensitivity
|
802.11b -80 dBm@8%PER
802.11g -68 dBm@8%PER
|
|
Channels
|
CH1 2.412Ghz - CH14 2.484Ghz
|
|
Management
|
Web-base Configuration
|
|
Hardware
|
|
POE
|
Splitter of POE Built-in
|
|
Base Platform
|
RTL 8186
|
|
Clock Speed
|
180Mhz
|
|
Reset Switch Built-in
|
SW2
|
|
SDRAM
|
32M bytes (with 2 2Mx16x4 SDRAM chips)
|
|
Flash
|
4M bytes
|
|
Built-In LED Indicators
|
1 Power, 1 TX
|
|
Operating environment
|
0 ~50° C ambient temperature
|
|
Storage Temperature
|
-10~70° C ambient temperature
|
|
Power Supply
|
DC 12V @ 1.25A + DC injector
|
Plug & Play
.jpg)

 200x.jpg)
|